Place of Origin:
China
Brand Name:
CAT
Model Number:
349D2
Complete hydraulic main pump assembly for the CAT 349D2 and the 345D to 349D excavator group, quoted on primary part number 295-9663 with pump model K5V212DPH. This is a variable displacement axial piston, two-section GP-PISTON pump. The 349D2 name is quoted against two different pump families — the K5V212 group on 295-9663 and the K7V280DTP group on 566-8632 — so the machine generation must be confirmed before ordering. Several numbers printed beside 295-9663 are internal rotating group and regulator references rather than complete pumps.
| Product Name | Hydraulic Main Pump Assembly |
|---|---|
| Primary Part Number | 295-9663; 2959663 |
| Pump Model | K5V212DPH; also written K5V212 and K5V200DPH |
| Pump Group | GP-PISTON, variable displacement axial piston, two section |
| Numbers Quoted Beside It | 295-9424; 295-9426; 296-4670; 259-0818; 242-6805; 497-8497; 434-8189; 465-1021; 488-4576; 349-4066; 569-8250; 326-4424 |
| Remanufactured Exchange | 20R-0095 |
| Machine Fitment | 349D2; 349D2L; 349D; 349DL; 345D; 345DL; 345C; E345D; E349D |
| Alternate Family for GC Machines | K7V280DTP on 566-8632; 627-1299; 584-0379 for 349GC; 350GC; 352GC; 349F; 349D2 |
| Engine Installed With | C13 |
| Condition | New aftermarket, remanufactured exchange and genuine used are all traded |
| Warranty | 12 months on new and remanufactured units |
| Packaging | Drained, port plugs fitted, regulator braced, timber crate |
| Category | Replaceable Part Numbers & Compatible Models |
|---|---|
| Number Forms | 295-9663; 2959663 |
| Pump Model Numbers | K5V212DPH; K5V212; K5V200DPH |
| Numbers Bundled Into Titles | 295-9424; 295-9426; 296-4670; 259-0818; 242-6805; 497-8497; 434-8189; 465-1021; 488-4576; 349-4066; 569-8250; 326-4424 |
| Compatible Machines | 349D2; 349D2L; 349D; 349DL; 345D; 345DL; 345C; E345D; E349D |
| Alternate Family | K7V280DTP on 566-8632; 627-1299; 584-0379 for 349GC; 350GC; 352GC; 349F |
Titles place 349D2 with both the K5V212 group on 295-9663 and the K7V280DTP group on 566-8632, the latter alongside 349GC, 350GC and 352GC. These are not the same pump. Read the number from the machine plate rather than from a combined title.
295-9424 and 295-9426 are quoted as regulator and rotating group references for this pump family, and 488-4576 and 349-4066 appear on other sections. A listing that prints a dozen numbers in one line is describing variants and components, not one interchangeable part.
The 20R prefix denotes an exchange unit. A quotation carrying both 295-9426 and 20R-0095 may be offering remanufactured stock, so the condition tier must be stated in writing.
Complete pumps in this group are advertised between about USD 1,500 and 2,800, with a low outlier near USD 750 and a high near USD 5,650 for the same number. A two-section main pump advertised near USD 480 does not describe a complete pump, and one listing near USD 47,000 belongs to a different machine size.
Pilot gear pump; charge pump; regulator and servo piston; valve plate left and right; rotor and cylinder block; drive shaft; piston shoe and set plate; seal and gasket kit; solenoid valve; pressure sensor; swing motor; travel motor; control valve; hydraulic oil cooler.
A hydraulic main pump assembly for CAT349D2 and the 345D to 349D group, quoted on 295-9663 with the pump model K5V212DPH.
349D2, 349D2L, 349D, 349DL, 345D, 345DL, 345C and E345D, with a C13 engine.
No, GC and Next Generation machines use the K7V280DTP group.
It is a regulator reference, not a complete pump.
No, the 20R prefix is a remanufactured exchange unit.
The machine model and serial, and the pump plate number from the old unit.
Send your inquiry directly to us
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
